登录/注册
微信扫码登录
手机登录
| # | 文件名称 | 文件大小 |
|---|---|---|
| 1 | #25 Sprocket with Hub - 18t - .500 Hex ID.SLDPRT | 422 KB |
| 2 | #8-32 SHCS, Grade 8 Steel Rev2_SSA0832-0500ZB.sldprt | 33.7 KB |
| 3 | .625in OD - .25in ID Bearing.SLDPRT | 115 KB |
| 4 | 10-32 nylok.SLDPRT | 57.7 KB |
| 5 | 11t CIM Gear with 12t Center Distance (Steel).SLDPRT | 276 KB |
| 6 | 18t Gear with .500 Hex Bore - Steel.SLDPRT | 242 KB |
| 7 | 1st Stage L Bracket.SLDPRT | 67.9 KB |
| 8 | 1st Stage cross support-Static 1.CWR | 13.1 MB |
| 9 | 1st Stage cross support.SLDPRT | 192 KB |
| 10 | 1st stage.SLDASM | 449 KB |
| 11 | 20t Gear with .500 Hex Bore.SLDPRT | 249 KB |
| 12 | 217-2625-012 Rev1.sldprt | 30.5 KB |
| 13 | 217-2625-017 Rev1_9714K61.sldprt | 28.6 KB |
| 14 | 217-2625-018 Rev1_98541A410.sldprt | 32 KB |
| 15 | 217-2742-001 Rev4.sldprt | 35.1 KB |
| 16 | 217-2822-001 Rev4.sldprt | 73.8 KB |
| 17 | 217-4649-001 Rev1.sldprt | 85.4 KB |
| 18 | 217-4649-005 Rev1_SSA0003-008BA.sldprt | 31.1 KB |
| 19 | 217-4649-006 Rev1_SSA0004-008BA.sldprt | 31 KB |
| 20 | 217-4649-007 Rev1_94105A824.sldprt | 35.6 KB |
| 21 | 217-5823-001 Rev7.sldprt | 689 KB |
| 22 | 217-5823-002 Rev7.sldprt | 544 KB |
| 23 | 217-5823-007 Rev2.sldprt | 75.9 KB |
| 24 | 217-5823-008 Rev3.sldprt | 40.8 KB |
| 25 | 217-5823-009 Rev1.sldprt | 33 KB |
| 26 | 217-5823-100 Rev1.sldasm | 29 KB |
| 27 | 217-5823-200 Rev1.sldasm | 1.12 MB |
| 28 | 217-8080-002 Rev1.sldprt | 142 KB |
| 29 | 217-8080-005 Rev1_91251A105.sldprt | 29.7 KB |
| 30 | 217-8080-baseRev4_no wires.sldprt | 2.06 MB |
| 31 | 217-9191-001 Rev3.sldprt | 2.98 MB |
| 32 | 217-9191-002 Rev3.sldprt | 3.7 MB |
| 33 | 217-9191-003 Rev1.sldprt | 49.2 KB |
| 34 | 217-9191-004 Rev2.sldprt | 146 KB |
| 35 | 217-9191-005 Rev1.sldprt | 394 KB |
| 36 | 217-9191-006 Rev2.sldprt | 281 KB |
| 37 | 24t Gear with .375 Hex Bore.SLDPRT | 268 KB |
| 38 | 24t x 9mm Wide Double Flange Aluminum Pulley (GT2 3mm, .500in Hex Bore)(217-5875).SLDPRT | 190 KB |
| 39 | 2in Wheel Intergrated 0500 HEX Hub.sldprt | 180 KB |
| 40 | 2nd Stage cross rail Top.SLDPRT | 193 KB |
| 41 | 2nd Stage cross rail.SLDPRT | 194 KB |
| 42 | 2nd Stage rail mk2.SLDPRT | 267 KB |
| 43 | 2nd stage.SLDASM | 440 KB |
| 44 | 38t Gear with .500 Hex Bore.SLDPRT | 228 KB |
| 45 | 3rd stage lower cross bar.SLDPRT | 230 KB |
| 46 | 40t Gear with .375 Hex Bore.SLDPRT | 258 KB |
| 47 | 40t Gear with .500 Hex Bore.SLDPRT | 267 KB |
| 48 | 42t Gear with .500 Hex Bore.SLDPRT | 686 KB |
| 49 | 4IN Compliant Wheel FINAL Overmold.sldprt | 244 KB |
| 50 | 4th Stage Rail.SLDPRT | 150 KB |
| 51 | 60t x 9mm Wide Double Flange Aluminum Pulley (GT2 3mm, .500in Hex Bore)(217-5876).SLDPRT | 377 KB |
| 52 | 775pro.SLDPRT | 250 KB |
| 53 | Arm Crossbar.SLDPRT | 200 KB |
| 54 | Back Bar.SLDPRT | 241 KB |
| 55 | Back Bumper Mounting Piece.SLDPRT | 90.9 KB |
| 56 | Back Upper Frame Upright Gusset.SLDPRT | 70.2 KB |
| 57 | Back Upper Frame Upright.SLDPRT | 92.8 KB |
| 58 | Back Wood Piece.SLDPRT | 224 KB |
| 59 | BaneBots RS550.sldprt | 124 KB |
| 60 | Battery U.SLDPRT | 83.8 KB |
| 61 | Battery.SLDPRT | 41.3 KB |
| 62 | Bearing to Sprocket Spacer.SLDPRT | 57.3 KB |
| 63 | Bellypan 2.SLDPRT | 583 KB |
| 64 | Bottom gusset.SLDPRT | 117 KB |
| 65 | Bumpers.SLDASM | 167 KB |
| 66 | CAN wire.SLDPRT | 44.5 KB |
| 67 | CIM.SLDPRT | 132 KB |
| 68 | Carraidghe.SLDASM | 281 KB |
| 69 | Center Sprocket Spacer.SLDPRT | 47.7 KB |
| 70 | Chain Guard Front Left.SLDPRT | 127 KB |
| 71 | Chain Guard Front Right.SLDPRT | 129 KB |
| 72 | Clamping Shaft Collar - .500 Hex ID.SLDPRT | 506 KB |
| 73 | Climber bar Right - for plasma.SLDPRT | 201 KB |
| 74 | Climber bar.SLDPRT | 198 KB |
| 75 | Colson Performa 4 x 1.5 .500 Hex bore.SLDPRT | 1.14 MB |
| 76 | Cover Panel Assembly.SLDASM | 250 KB |
| 77 | Cover Panel.SLDPRT | 186 KB |
| 78 | Cross Bar.SLDPRT | 280 KB |
| 79 | Crossbar to Arm Bar.SLDPRT | 83.9 KB |
| 80 | Cube Support.SLDPRT | 124 KB |
| 81 | Cylinder Mount to Carriage.SLDPRT | 152 KB |
| 82 | Cylinder Mount to Intake.SLDPRT | 83.7 KB |
| 83 | DT Frame Gusset.SLDPRT | 92.6 KB |
| 84 | Double Stage.SLDASM | 226 KB |
| 85 | Drive Train.SLDASM | 12.2 MB |
| 86 | Drivetrain Back Shaft.SLDPRT | 81.2 KB |
| 87 | Drivetrain front shaft.SLDPRT | 56.4 KB |
| 88 | Encoder Mount.SLDPRT | 92.4 KB |
| 89 | First Stage Gusset.SLDPRT | 106 KB |
| 90 | First Stage mk2.SLDPRT | 368 KB |
| 91 | Flanged Bearing - 0.375 x 0.875 x 0.280.SLDPRT | 59.9 KB |
| 92 | Flanged Bearing - 0.500 (Hex) x 1.125 x 0.313 v2.SLDPRT | 84 KB |
| 93 | Flanged Bearing - 0.500 x 1.125 x 0.313.SLDPRT | 52.4 KB |
| 94 | Frame Lift Gusset.SLDPRT | 104 KB |
| 95 | Frame Standoff Gusset.SLDPRT | 80.9 KB |
| 96 | Frame Support.SLDPRT | 363 KB |
| 97 | Frame to Bumper Standoff.SLDPRT | 73.6 KB |
| 98 | Frame.SLDASM | 309 KB |
| 99 | Front Bar.SLDPRT | 103 KB |
| 100 | Front Bearing to Sprocket Spacers.SLDPRT | 53.7 KB |
| 101 | Front Bumper Mounting Piece Left.SLDPRT | 98.5 KB |
| 102 | Front Bumper Mounting Piece Right.SLDPRT | 98 KB |
| 103 | Front Gusset.SLDPRT | 72.3 KB |
| 104 | Front Left Wood Bumper Piece.SLDPRT | 296 KB |
| 105 | Front Right Wood Bumper Piece.SLDPRT | 299 KB |
| 106 | Front Support.SLDPRT | 88.8 KB |
| 107 | Front Upper Frame Upright Gusset.SLDPRT | 112 KB |
| 108 | Front Upper Frame Upright.SLDPRT | 108 KB |
| 109 | Full 2 Stage lift.SLDASM | 878 KB |
| 110 | Full Frame.SLDASM | 24.9 MB |
| 111 | Full Robot (2).JPG | 93.7 KB |
| 112 | Full Robot With 2 Stage Elevator.SLDASM | 36.2 MB |
| 113 | Gear Cover to Plate Spacer.SLDPRT | 39.4 KB |
| 114 | Gear Cover.SLDPRT | 109 KB |
| 115 | Gearbox Gusset.SLDPRT | 101 KB |
| 116 | Gearbox Idler Shaft.SLDPRT | 54.8 KB |
| 117 | Gearbox Output Shaft.SLDPRT | 79.6 KB |
| 118 | Gearbox Plate.SLDPRT | 407 KB |
| 119 | Gearbox Spacer .5105.SLDPRT | 64.9 KB |
| 120 | Gearbox Spacer .7357.SLDPRT | 65 KB |
| 121 | Gearbox Spacer 1.2337.SLDPRT | 65.5 KB |
| 122 | Gearbox Spacer 1.8567.SLDPRT | 63.1 KB |
| 123 | Gearbox Support Gusset.SLDPRT | 101 KB |
| 124 | Gearbox Support.SLDPRT | 142 KB |
| 125 | Hinge Part A.SLDPRT | 131 KB |
| 126 | Hinge Part B.SLDPRT | 77.6 KB |
| 127 | Horizontal Rail.SLDPRT | 191 KB |
| 128 | Idler Bearings.SLDASM | 112 KB |
| 129 | Inner Intake Gusset.SLDPRT | 76.2 KB |
| 130 | Intake Assembly.SLDASM | 5.9 MB |
| 131 | Intake Hardstop.SLDPRT | 70.2 KB |
| 132 | Intake and 2 Stage Elevator.SLDASM | 6.67 MB |
| 133 | Left Gearbox.SLDASM | 450 KB |
| 134 | Left Horizontal Rail.SLDPRT | 216 KB |
| 135 | Left Intake Assembly.SLDASM | 5.53 MB |
| 136 | Lift Encoder Mount.SLDPRT | 88.8 KB |
| 137 | Lift Gearbox Plate.SLDPRT | 187 KB |
| 138 | Lift Gearbox.SLDASM | 1.52 MB |
| 139 | Lift Motor to Gear Spacer.SLDPRT | 54.5 KB |
| 140 | Lift Output Shaft Spacer 2.SLDPRT | 53.3 KB |
| 141 | Lift Output Shaft Spacer.SLDPRT | 57.2 KB |
| 142 | Lift Output Shaft.SLDPRT | 79.8 KB |
| 143 | Lift Roller Assembly.SLDASM | 176 KB |
| 144 | Lift Roller Spacer.SLDPRT | 65.3 KB |
| 145 | Lift Roller.SLDPRT | 95.5 KB |
| 146 | Limit Switch Mount.SLDPRT | 114 KB |
| 147 | Lower Electrical Board.SLDASM | 10.6 MB |
| 148 | M-092.5-DP.SLDASM | 267 KB |
| 149 | Machined Versa Hub .500in Hex.SLDPRT | 241 KB |
| 150 | Main Breaker.SLDPRT | 807 KB |
| 151 | Main Support Rail.SLDPRT | 153 KB |
| 152 | Motor Wire.SLDPRT | 34.2 KB |
| 153 | Outer Intake Gusset.SLDPRT | 76 KB |
| 154 | Output shaft to wheel spacer.SLDPRT | 54.2 KB |
| 155 | PCM.SLDPRT | 5.79 MB |
| 156 | PDP.SLDPRT | 10.4 MB |
| 157 | Pulley Assembly.SLDASM | 99.2 KB |
| 158 | Pulley Bushing.SLDPRT | 54.9 KB |
| 159 | Pully Mounting Gusset.SLDPRT | 94.6 KB |
| 160 | Pully Spacer.SLDPRT | 50.7 KB |
| 161 | Rigging Pulley Kit.SLDASM | 128 KB |
| 162 | Rigging Pulley Spacer.SLDPRT | 64.8 KB |
| 163 | Rigging Pulley.SLDPRT | 87.4 KB |
| 164 | Right Gearbox.SLDASM | 471 KB |
| 165 | Right Intake Assembly.SLDASM | 5.54 MB |
| 166 | RoboRio.SLDPRT | 24.9 MB |
| 167 | SRX Mag Encoder.SLDPRT | 243 KB |
| 168 | Side Bar.SLDPRT | 267 KB |
| 169 | Side Bearing Kit.SLDASM | 142 KB |
| 170 | Side Bumper Mounting Piece.SLDPRT | 93.9 KB |
| 171 | Side Wood Piece.SLDPRT | 195 KB |
| 172 | Side roller spacer 2.SLDPRT | 50.9 KB |
| 173 | Side roller spacer.SLDPRT | 46.6 KB |
| 174 | Stage 1 Hardstop.SLDPRT | 64.9 KB |
| 175 | Talon SR.SLDPRT | 4.14 MB |
| 176 | Talon SRX No wires.SLDASM | 2.32 MB |
| 177 | Tank mount.SLDPRT | 79.2 KB |
| 178 | Top Bearing Kit.SLDASM | 115 KB |
| 179 | Triple Stage.SLDASM | 223 KB |
| 180 | Upper Electrical Board Assembly.SLDASM | 23.2 MB |
| 181 | Upper Electrical Board.SLDPRT | 369 KB |
| 182 | Upper Frame Gusset.SLDPRT | 80.3 KB |
| 183 | VIAIR 90C compressor.SLDPRT | 309 KB |
| 184 | VP .500 Hex Output Stage V2.SLDASM | 530 KB |
| 185 | VP 775 Motor Coupling.SLDPRT | 72.6 KB |
| 186 | VP 775 motor mounting plate.SLDPRT | 265 KB |
| 187 | VP 775Pro 2Stage .500 Hex V2.SLDASM | 1.01 MB |
| 188 | VP 775Pro 3Stage .500 Hex V2.SLDASM | 999 KB |
| 189 | VP 775pro with Input Housing V2.SLDASM | 368 KB |
| 190 | VP Input Housing V2.SLDPRT | 264 KB |
| 191 | VP Lite Ring Gear.SLDPRT | 2.33 MB |
| 192 | VP Output .500 Hex.SLDPRT | 3.23 MB |
| 193 | VP Output Bearing.SLDPRT | 156 KB |
| 194 | VP Output Housing V2.SLDPRT | 434 KB |
| 195 | VP RingGear.SLDPRT | 2.18 MB |
| 196 | VP Snapring.SLDPRT | 74.6 KB |
| 197 | VP Spline Coupler.SLDPRT | 425 KB |
| 198 | VP Spring Washer.SLDPRT | 79.9 KB |
| 199 | VP to pulley spacer.SLDPRT | 53.8 KB |
| 200 | VRM.SLDPRT | 3.05 MB |
| 201 | VersaPlanetary All Non-CIM Motors_NeveRest Motor.sldasm | 28 KB |
| 202 | VersaPlanetary Input Blocks_VP LIte Input Block.sldasm | 1.17 MB |
| 203 | VersaPlanetary Lite 1 Stage .5 Hex.SLDASM | 4.74 MB |
| 204 | VersaPlanetary Output Blocks_VP Lite Output Block.sldasm | 26.2 KB |
| 205 | Victor SP.SLDPRT | 3.58 MB |
| 206 | Victor SPX.SLDASM | 4.76 MB |
| 207 | _09P0000_rear_head.sldprt | 45 KB |
| 208 | _09R-3.81350C.sldprt | 30.9 KB |
| 209 | _09R000-0_rod_guide.sldprt | 38.1 KB |
| 210 | _C-092.5-DP0000_rod.sldprt | 30.1 KB |
| 211 | _D-14059.sldprt | 38 KB |
| 212 | am-3480+4IN+Compliant+Wheel.SLDASM | 507 KB |
| 213 | back gusset.SLDPRT | 70.7 KB |
| 214 | bumper pieces.SLDPRT | 94.6 KB |
| 215 | climber cross bar alt.SLDPRT | 45.7 KB |
| 216 | climber hook V2.SLDPRT | 74.2 KB |
| 217 | climber hook alt.SLDASM | 486 KB |
| 218 | climber hook block'.SLDPRT | 74.1 KB |
| 219 | climber spacer block alt.SLDPRT | 52.6 KB |
| 220 | climber support bar cross bar.SLDPRT | 47.3 KB |
| 221 | idler spacer.SLDPRT | 52 KB |
| 222 | intake belt.SLDPRT | 90.4 KB |
| 223 | intake wheel shaft.SLDPRT | 75.8 KB |
| 224 | left intake arm tube.SLDPRT | 205 KB |
| 225 | lower gusset.SLDPRT | 69.2 KB |
| 226 | lower roller assembly.SLDASM | 137 KB |
| 227 | magnet.SLDPRT | 74 KB |
| 228 | other roller spacer.SLDPRT | 47.6 KB |
| 229 | r3 bearing.SLDPRT | 125 KB |
| 230 | right intake arm tube.SLDPRT | 223 KB |
| 231 | roller spacer.SLDPRT | 58.2 KB |
| 232 | side roller gusset.SLDPRT | 111 KB |
| 233 | top roller gusset.SLDPRT | 92.7 KB |
FRC2018 997号 orbit机器人车SolidWorks 3D模型
图纸ID：10170506
文件大小：258.36M
软件版本：
图纸格式：sldprt,sldasm
参数/编辑：可修改，包括参数
上传时间：2024-03-08
图纸介绍：
免费下载
幽谷空山
作品: 0
粉丝: 0
文件列表
【FRC2018 997号 orbit机器人车】相关作品
滚动更载更多~
提示
×
下载该图档需要消耗0金币！
确认下载
